CNC Calc v1

User Input

Basic cylinder pocket information

Units of length: Tenths of a thousandth of an inch, so four decimal places on whole inches.

Bit or end-mill information Bit diameter (D == 2r): Number of flutes: Target chip load (CL) a.k.a. IPT a.k.a. ADOC: Bit maximum RPM: Bit tool number (trigger tool change): Axial step-over ADOC (%):

Cylinder information Cylinder inside diameter (2R): Cylinder depth: Cylinder center absolute X: Cylinder center absolute Y:

Machine limitations Max RPM: Min RPM: Max AIPM: Min AIPM: Max RIPM: Min RIPM:

G-code program number Program number

Select RPM or SFM as an input value type RPM or SFM for specifying radial speed:

RPM a.k.a. Snnnnn:

SFM:

Select pitch or descent angle for cylindrical pocketing helix Pitch or descent angle for helical interpolation:

Pitch:

Descent angle: 360 degrees 2pi radians or a thousand mils Gradians or gons

SFM

Overview Pictures

Top-down a.k.a. axial view of axial step-over (ASO, ADOC), at 40% and for a target chip load a.k.a. Inches per tooth (IPT) of 0.003 inches.

Side-view of the helix inside the cylindrical pocket witch pitch 0.0625 inches and a descent angle of 0.001 degrees.

Computed Program Parameters

Output values
Parameter	Value	G-Code snippet
Tool nbr.	001	`M06 T001`
Cylinder center X	5.125	`I5.125`
Cylinder center Y	3.675	`J3.675`
RPM	12000	`M03 S12000`
IPM	200.0	`F200.0`
IPT	100.0
Program number	9999	`O9999`

G-Code

		    
%
N0001 O9999 (Cylinder Pocket Helix)
N0002 M06 T001
N0003 M03 12000
N0004 (G54)
N0005 (G90 G20 G17)
N0006 G00
N0007  X5.125 Y3.675
N0008	Z1.0
N0009 G03 F200.0
N0010  I5.125 J3.675
N0011  Z-0.1
N0012	X5.025 y3.676
N0013 G00 Z2.0
N0014 M30
%